1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 615/641-7533 800/688-6359 Manual Part No.: 8109440 03HENNESSY INDUSTRIES INC. Manufactur
3. Tighten the locking handle and move the tool intoposition near the edge of the rim, as shown above.4. Insert the bead lifting tool between the rim
H.I.T. 5000COATS H.I.T. 5000 Changer • 5Bead Loosening and Demounting1. After chucking the wheel, position the beadloosener disc against the sidewall
Bead Loosening1. Remove the valve core. Deflate the tire away fromthe machine and remove any calcium chloride or othersubstances from the tire prior t
H.I.T. 5000COATS H.I.T. 5000 Changer • 73. Rotate the wheel counterclockwise while main-taining pressure on the spade tool until the outer beadis demo
There are two methods of spreading the tire with theroller tool.Method A:1. With the first bead removed, hook the roller toolover the outer bead and m
H.I.T. 5000COATS H.I.T. 5000 Changer • 91. Using a grease gun and chassis grease, lubricatechuck hub bushing once every month.2. Remove the side panel
8109440 03 10/09 © Copyright 1997 Hennessy Industries and COATS®All Rights Reserved Printed in USATruck Tire Changer Warranty PolicyThe COATS®Company
ii • COATS H.I.T. 5000 ChangerSafety
COATS H.I.T. 5000 Changer • iiiTable of ContentsOperator Protective Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
iv • COATS H.I.T. 5000 ChangerSafetyFailure to follow danger, warning, and cautioninstructions may lead to serious personal injury ordeath to operator
COATS H.I.T. 5000 Changer • vSafety InstructionsOnly properly trained personnel shouldservice tires on the H.I.T. 5000. Read allsafety and operating i
vi • COATS H.I.T. 5000 ChangerH.I.T. 5000InstallationIt is not necessary to bolt the H.I.T. 5000 to the floor.However, if desired, use the holes provi
COATS H.I.T. 5000 Changer • 1Principal Operating PartsSpecificationsWorking Area: 10 Foot Wide x 10Foot Long x 8 Foot HeightWeight: 1,400 PoundsHandle
Wheel ClampingThe self-centering chuck is powered by the high pres-sure hydraulic system to securely lock onto the wheel.Important: The hydraulic pres
H.I.T. 5000COATS H.I.T. 5000 Changer • 3Bead Loosening1. After locking the wheel on the chuck, remove thevalve core and deflate the tire completely.2.
Comentarios a estos manuales