Coats Kit 8183061, Duckhead Mount/Demount Tool Upgrade Manual de usuario descargar pdf

Duckhead™ Mount/Demount Tool

Upgrade Kit 8183061

COATS, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565

(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX

Note:

These instructions are to be used

on tapered vertical slide shafts only.

Nylon mount/demount tools are not cov-

ered under regular warranty as these items

are expendable.

Mount/Demont Tool Head Adjustment

To Adjust Tool Head Lift

Shoulder screw (ref.1) sets the tool head lift for

metal duckheads – no adjustment required. Place

shim 85606345 on screw if using a plastic duck-

head.

To Adjust Lock Tightness

With lock handle unlocked, loosen jam nut (ref. 2)

and adjust pin (ref. 3) until a slight firmness is

obtained, then tighten jam nut and check. Also

recheck tool head lift at this time.

Sin comentarios

Coats Kit 8183061, Duckhead Mount/Demount Tool Upgrade Manual de usuario